Steel Sailboat located in Roatan

Steel Sailboat located in Roatan

Specs Builder: Custom by millwrite in Canada Designer: Thomas Colvin Flag of Registry: Canada Keel: FullEngine: Sole Diesel SM-82, 82 hp @2500 rpmPRM 2.9:1 hydraulic transmissionAbout 100 hours on new engine and transmission Dimensions LOA: 44 ft 0 in Beam: 11 ft 8 in Length on Deck: 40 ft 0 in Maximum Draft: 5 ft 6 in Displacement: 33000 lbs Dry Load Specs Builder: Custom by millwright in Canada Designer: Thomas Colvin Flag of Registry: Canada Keel: Full Fresh Water Tanks: (180 Gallons) Fuel Tanks: (141 Gallons) Holding Tanks: (18 Gallons) Accommodations Number of heads: 1 Electronics Navigation center - new Garmin GPSmap 1020New Furuno wireless radar (DRS4W) Radio - ICOM 718 ham/ssb, with SGC (US-made) tuner plus new Yaesu FT891 and new SGC 230 tuner, backstay. VHF - ICOM, plus spare Standard Horizon w/DSC, and spare handheld radiosNew Simrad autopilot. New electric/hydraulic linear drive (Octopus brand) plus spare GPS Depthsounder - Furuno, Inside Equipment Manual bilge pump Marine head Electric bilge pump Fresh water maker - Cat pump, 4 foot membrane (20 gallons per hour), plus fittings and large supply of chemicals Refrigerator - Engel MD14F (2017) Oven - Force 10 two-burner stovetop w/oven Electrical Equipment Generator - Kubota AE1100, gasoline, very low hours, new carburetor Outside Equipment/Extras Wind generator - Air-X 400-watt, new! Tender - Minto fiberglass rowing dinghy w/two sets of long oars, plus 4hp Johnson Davits - (2018), with stainless ratchet-style winches Solar panel - pair 35-watt, one 75-watt (2015), Blue Sky 2000E controller (2015) Electric windlass Additional Information --The keel bottom is ½ inch, keel sides are ¼ inch, hull is 3/16 inch and deck/house is 10 gauge (slightly over 1/8 inch) steel. Upper deck and house, outside gunwales are molten zinc spray prior to painting, reduces nuisance rust spots.--Entire boat coated with Devoe 235 Bar-Rust epoxy. 4 layers exterior prior to top coat, bottom 6 layers. bilge area 10 layers. --New AIS class b transponder --(2018) Victron BMV-700 battery monitor, plus fuel tank gauges. --(2018) Fuel delivery system with Marco transfer pump (plus new spare), fuel tank manifold/valves, Goldenrod fuel/water separator/filter. --Numerous electric pumps (pressure and washdown). Anchors/chain/rope • 66 pound Bruce (genuine) • 66 pound Bruce (custom built) • 55 pound CQR-type(custom built) • 45 pound Danforth • 60 pound folding Bruce (stock removes, custom built) • All above with extra heavy duty swivels and shackles • Pair of 22 lb CQR • Dinghy anchor • 2 pieces of 175 feet 3/8 hi-tensile (used one season) made in USA • Various lengths of 3/8 BB and 7/16 chain (about 200 feet) • Several hundred feet ¾ inch nylon • Several hundred feet ½ inch nylon • Extra heavy duty anchor rollers (port and starboard) and cheeks Rig/sails • Galvanized rigging (2018) and galvanized heavy turnbuckles • Sails: mainsail, 2 staysails, roller furling yankee and 120% jib, all as new, with minor patch on staysail • Main mast is 40 feet, fore-mast is 36 feet, heavy wall aluminum with custom built stainless goosenecks and rigging hardware • Hood self furling, working well Galley/interior • Pressure water with charcoal filter • Force 10 propane stove with excellent oven, piezo lighting, fail safe burners on stove top and oven (shuts off propane if flame goes out) • Double deep SS sinks • Portable refrigerator (new) • Combinations of fluorescent and led lighting Other • LARGE inventory of spare parts and tools, including new spares for engine. • Spare high output alternator Accommodations Number of heads: 1

Where To Buy